Adjustable torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components.

Four-piece brush set designed specifically to clean bicycles,

Kit will bleed most models of Mineral Oil-based hydraulic bicycle disc brakes, including models made by Shimano, Magura, TRP, Tektro, Trick Stuff, SRAM DB8, Campagnolo, Promax, and Clarks.

100% biodegradable, natural, plant-based degreaser.

Go/no-go gauge indicates .5% and .75% wear.

PTFE and a proprietary blend of oils that works great in wet or dry conditions.

Shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.

Slides into rear dropouts and replaces the rear wheel for chain cleaning and transport

Perfect for cleaning cassettes, freewheels, and tires.

Professional quality 6" needle nose pliers with five different  crimping / grasping areas and a cutting blade.

A deluxe version of folding workstand designed and built for the home mechanic.

Slides between bicycle disc brake pads inside the caliper, to spread pads and compress the pistons when replacing pads, aligning pads, or performing other service procedures.

Combines precision fit wrenches for the three most popular spoke nipple sizes into one ergonomically-shaped wrench that fits nicely in the hand.

Measures the absolute tension of each of the spokes in a wheel.

Securely holds any of our TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height.

Versatile 3-way hex wrench (4mm, 5mm, 6mm).

Kit will bleed most models of DOT fluid-based hydraulic bicycle disc brakes, including models made by SRAM, Hayes, Formula.nd Hope.

Features one-hand operation with a thumb lock to hold the cable tight while your hand is removed to tighten pull-up bolts and nuts.

Quickly checks chain stretch and wear it will determine if a chain is good or bad,

Complete cleaning solution for cleaning bike chains, rear cogs, and chainrings.

Chain scrubber cleans bicycle chains quickly, easily, and effectively,

Professional shop-quality tool for removal and installation of bicycle chain rivets, for chain sizing and replacement.

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners.

Speeds installation of internally-routed electric wiring, shift cable/housing, brake cable/housing and hydraulic tubing into bicycle frames.

A basic folding workstand designed and built for the home mechanic.

Folding steel legs provice a solid base for toolbox and supplies.

Features all four of our shop grade screwdrivers in one handy set.

Made with a wide, flat tip for fast and easy tire removal. Features a spoke hook for when multiple levers are needed.

Truing stand designed and built for daily use.
Extra-tall uprights accommodate 29+ wheels, 200 mm hubs, and wheels with rotor discs and tires mounted.

 A small, handy tool designed to remove and install Schrader and Presta valve cores from bicycle tires, as well as Presta valve extenders with 5mm wrench flats.